检索

期
标题
作者
编号 8 (2023)
Detection of echo signals from discontinuities due to the use of super-resolution procedures for the control of concrete piles by the impact method
Bazulin E.
PDF
(Rus)
编号 6 (2025)
Determination of magnetic properties of pipe steels during the bending test
Myznov K., Ksenofontov D., Afanasiev S., Vasilenko O., Kostin V., Bondina A., Toporishchev A., Kukushkin S., Salomatin A.
PDF
(Rus)
编号 6 (2025)
Control of the technical condition of reinforced concrete products and structures by the method of acoustic-electric transformations
Gordeev V., Bespal’ko A., Shtalin S., Malyshkov S., Luo J.
PDF
(Rus)
编号 1 (2025)
Diffraction method of control of welded joints made by friction stir welding
Shchipakov N., Tishkin V., Kudriavtsev E., Fozilov T.
PDF
(Rus)
编号 9 (2024)
Image restoration of reflectors by the method of digital aperture focusing in thick-walled pipes of small diameter
Bazulin E.
PDF
(Rus)
编号 5 (2024)
Calculation of the DAC curve for images reconstructed by digital aperture focusing method
Bazulin A., Bazulin E., Vopilkin A., Korolev S., Romashkin S., Tikhonov D.
PDF
(Rus)
编号 4 (2025)
Cepstral Analysis of Ultrasonic Echoes Measured by an Antenna Array in Order to Obtain Super-Resolution Images of Reflectors
Bazulin E., Krylovich A.
PDF
(Rus)
编号 12 (2024)
Application of CF and DMAS Technology to Improve the Quality of Reflector Images Reconstructed from Echoes Measured by an Antenna Array
Bazulin E.
PDF
(Rus)
编号 1 (2024)
Investigation of the possibility detection of defects in rail foot by mfl method
Markov A., Mosyagin V., Antipov A., Ivanov G.
PDF
(Rus)
编号 7 (2024)
Using Poisson’s ratio and acoustic anisotropy parameter to assess damage and accumulated plastic strain during fatigue loading of austenitic steel
Mishakin V., Klyushnikov V., Gonchar A., Sergeeva O.
PDF
(Rus)
编号 9 (2024)
Reconstruction of the shape of a flaw in ferromagnetic plate by solving inverse problem of magnetostatics and series of direct problems
Nikitin A., Mikhaylov L., Mikhaylov A., Gobov Y., Kostin V., Smorodinskii Y.
PDF
(Rus)
编号 3 (2024)
Analysis of two methods of calibration of an ultrasonic antenna array mounted on a prism
Bazulin A., Bazulin E., Vopilkin A., Kokolev S., Romashkin S., Tikhonov D., Efimovskaya A.
PDF
(Rus)
编号 9 (2023)
Improvement of tfm-image quality due to correction of “parasitic” delays between antenna array elements
Bazulin E.
PDF
(Rus)
编号 5 (2024)
Mathematical modeling of radiation transparencies in the countable implementation of the dual energy method based on analog amplitude analysis of original signals
Udod V., Vorobeychikov S., Osipov S.
PDF
(Rus)
编号 10 (2023)
Comparative tests of mechanical characteristics and structure of basic and engineering plastic filaments for additive manufacturing
Abramova T., Bekher S.
PDF
(Rus)
编号 6 (2023)
Application of the parameters of the remagnetization curve`s spectral characteristics to determine the hardness of ferromagnetic material
Sokolov R., Muratov K., Novikov V.
PDF
(Rus)
编号 3 (2025)
Asymptotics of an Ultrasonic Sounding Field in Anisotropic Materials
Glushkov E., Glushkova N.
PDF
(Rus)
编号 10 (2024)
Measuring the Viscosity of Sulphur Melt by the Proton Microscopy Method
Khurchiev A., Gavrilin R., Skoblyakov A., Kantsyrev A., Golubev A., Mintsev V., Nikolaev D., Shilkin N., Belikov R.
PDF
(Rus)
编号 10 (2023)
Development of a technique for applying pa and tofd methods for mechanized ultrasonic testing of welded joints of main pipelines using the USD-60FR-16/128 flaw detector
Ajibaye D., Savichev M., Atroshenko V.
PDF
(Rus)
编号 6 (2023)
Acoustic monitoring of steel production in the ladle-furnace unit
Martyugov A., Ershov E., Varfolomeev I., Bogachev D., Vinogradova L.
PDF
(Rus)
编号 4 (2025)
Ultrasonic Evaluation of Residual Stresses in AISI 316Ti Steel Specimen after Laser Shock Peening
Gonchar A., Plekhov O., Kurashkin K., Gachegova E., Vshivkov A., Panteleev I.
PDF
(Rus)
编号 11 (2024)
Multi-frequency eddy current control of structural steel sheets
Egorov A., Polyakov V.
PDF
(Rus)
编号 8 (2023)
On the possibility of determining the elastic modulus of metals by the dynamic instrumented indentation method
Gogolinskii K., Umanskii A., Golev A.
PDF
(Rus)
编号 10 (2023)
Ultrasound tomography based on the coefficient inverse problem as a way to combat structural noise
Bazulin E., Goncharsky A., Romanov S., Seryozhnikov S.
PDF
(Rus)
编号 12 (2024)
Assessment of Stress-Strain State of Pipelines Based on the Measurements of Magnetic Characteristics in Field Conditions
Myznov K., Vasilenko O., Kostin V., Tronza V., Bondina A., Kukushkin S., Tryakina N., Salomatin A.
PDF
(Rus)
编号 12 (2023)
Scope of applicability of the technique for constructing magnetic induction lines for flaw defectometry of extended objects
Nikitin A., Mikhaylov A., Mikhaylov L., Gobov Y., Kostin V., Smorodinskiy Y.
PDF
(Rus)
编号 7 (2024)
Analysis of methods for calculating the module of elasticity during dynamic instrumental indentation
Gogolinskii K., Umanskii A., Golev A., Doronin K., Tomsky K.
PDF
(Rus)
编号 8 (2023)
Density study of thermoexpanded graphite samples by acoustic amplitude-shadow method
Bogdan O., Muraveva O., Blinova A., Zlobin D.
PDF
(Rus)
编号 12 (2023)
Mirror-shadow method of ultrasonic testing of the railroad wheelset axles using the electromagnetic-acoustic method of wave generation and reception
Platunov A., Murav'ev V., Murav'eva O., Nikitina P.
PDF
(Rus)
编号 7 (2024)
Changes in magnetic characteristics of pipes during hydraulic and pneumatic tests of trunk pipelines
Myznov K., Vasilenko O., Kostin V., Tronza V., Bondina A., Kukushkin S., Tryakina N.
PDF
(Rus)
编号 8 (2023)
Ultrasonic adhesion control of special coatings
Bychenok V., Khizhnyak S., Sorokin A., Simonenko A., Berkutov I., Alifanova I., Shmakov A., Dyachkovsky E.
PDF
(Rus)
编号 2 (2023)
Reconstructing reflector images at the boundary between base metal and deposited metal using Plane Wave Imaging technology
Bazulin E.
PDF
(Rus)
编号 2 (2024)
Analysis of test results and test quality during certification of non-destructive testing specialists
Murav’ev V., Volkova L., Murav’eva O., Murashov S.
PDF
(Rus)
编号 9 (2023)
The possibilities of the electromagnetic-acoustic multiple shadow method when testing the threads of pump rods
Muraveva O., Pushin P., Torkhov K.
PDF
(Rus)
编号 4 (2023)
Possibilities of manual eddy current testing for measuring the depth of contact-fatigue cracks of the surface of rolling rails
Shlyakhtenkov S., Nekrasov D., Palagin S., Bessonova O., Popkov A., Becher S.
PDF
(Rus)
编号 5 (2023)
Acoustic and electromagnetic properties of a martensitic-aging ferro-nickel alloy with the addition of copper under mechanical tension
Murav'ev V., Murav'eva O., Vladykin A.
PDF
(Rus)
1 - 36 的 36 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语